Mobile · Systems and zones layout
16-Foot Trailer Blueprint
Mid-size off-grid camper with inset covered deck, split rear module, and heavy systems grouped near the axle.
Zone layout
Front / hitch
Sleep / storage zone at tongue end.
Living / dinette
Dinette and convertible guest bed area.
Kitchen / utility
Counter, sink, cooktop, battery bank, and panels near axle centerline.
Rear split module
Wet room (~3 ft 6 in × 4 ft) and inset covered deck side-by-side within the 16 ft body.
Key specifications
- Classification
- Mobile — fixed body on trailer, not a fixed foundation building
- Overall body
- 16 ft length × 7 ft width
- Rear module
- 4 ft split: wet room and integrated inset deck
- Systems
- Electrical cabinet, batteries, water, and charger located near axle
- Exterior
- Smooth MDO upper, bedliner lower 4 ft, stained cedar accents
- Blueprint sheets
- 7 pages
Plan contents
Seven-sheet concept blueprint set for contractor planning: overall floor plan, elevations, sections, systems, and build notes. Concept only—field verify all dimensions, weight, tongue load, electrical, plumbing, and local requirements.
PDF preview
If the preview does not load in your browser, use Open PDF or Download below.
Transferability
Zone and systems placement ideas may translate to fixed cabins, but this plan assumes a mobile chassis, axle loading, and travel-mode constraints. Fixed builds need independent structural and utility design.
Local engineering and code disclaimer
Concept blueprint for planning—not permit-ready construction documents. Verify materials, structure, electrical, plumbing, axle load, and code compliance before building.